Reinforcement Learning from Human Feedback (RLHF) aligns a large language model with human preferences through a three-stage architecture: the model is first prepared with supervised fine-tuning, a separate reward model is then trained on human comparison data to output a scalar preference score, and finally the language model's policy is optimized against that reward model using reinforcement learning. The core architectural insight is that subjective human judgment cannot be applied directly during training, so RLHF converts it into a differentiable, quantitative signal that a standard optimization algorithm can consume. As Nathan Lambert, Louis Castricato, Leandro von Werra, and Alex Havrilla explain in their Hugging Face walkthrough, RLHF is challenging precisely because it is a multiple-model training process with distinct stages of deployment rather than a single training run.
The Three Stages of RLHF Architecture
The Hugging Face authors break the training process into three core steps: pretraining a language model, gathering data and training a reward model, and fine-tuning the language model with reinforcement learning. Each stage has its own model, dataset, and objective, and the output of one stage becomes a fixed component of the next. The pretrained language model supplies the starting policy; the reward model distills human preference judgments into a numeric score; and the reinforcement learning loop uses that score to reshape the policy.
This division of labor is what makes the pipeline tractable. Human raters cannot grade every model output during training, and their judgments are not directly differentiable. By training a reward model once on a curated set of comparisons, the system obtains a reusable, differentiable approximation of human preferences that can score unlimited candidate outputs. The final stage then treats language generation as a sequential decision process, where each token choice is an action and the reward model evaluates the resulting response.
Stage 1: Supervised Fine-Tuning (SFT)
RLHF begins with a language model that has already been pretrained with classical objectives—next-token prediction over large text corpora. The Hugging Face authors identify this pretrained model as the starting point of the entire process, because RLHF does not create language capability from scratch; it steers capability that already exists. Pretraining produces linguistic fluency, but as the DEV Community interview-series explainer by jackma notes, fluency alone does not encode human values or task-specific preferences, and models trained purely on next-token prediction may generate toxic content, hallucinate confidently, or misunderstand user intent.
Supervised fine-tuning then adapts this base model to the instruction-following setting, typically by training on high-quality demonstrations of desired responses. The objective at this stage is to produce an initial, capable language model that behaves plausibly as an assistant before any preference-based optimization begins. This stage matters architecturally as well as behaviorally: the SFT model supplies both the policy that the reward model will later evaluate and, in common implementations, the backbone from which the reward model itself is constructed. A weak starting model would leave the reward model with poorly distributed candidate responses to compare, degrading the preference signal from the outset.
Stage 2: Training the Reward Model (RM)
The reward model is the component that translates qualitative human preferences into a quantitative training signal. Architecturally, it is typically constructed from a pre-trained LLM with a scalar regression head. As Wei-Ming Thor's course material on reward model architectures describes, instead of predicting the next token, a regression head—typically a simple linear layer—is added on top of the final hidden state representation, trained to output a single scalar value representing the predicted reward or preference score for a given response in the context of its prompt. The LLM backbone is reused because transfer learning exploits representations of language, grammar, semantics, and general knowledge already learned during pretraining.
Why a scalar? IBM's explainer on RLHF is direct: a reward model must intake a sequence of text and output a scalar reward value that numerically predicts how much a human would reward or penalize that text, because a scalar is essential for integration with the other components of the RL algorithm. IBM also explains why humans cannot simply rate responses on a one-to-ten scale directly: it is prohibitively difficult to align different raters on the relative value of a given score, or even on what constitutes a good or bad response in a vacuum. Comparison-based labeling sidesteps this, and the resulting model acts as a differentiable approximation of human preferences.
Thor's material, which cites the foundational InstructGPT paper by Long Ouyang and colleagues (2022), notes that the architecture choice involves trade-offs between how well the reward model captures human preference, computational cost, and pipeline complexity—and that for most applications, fine-tuning a pre-trained LLM with a scalar regression head provides a strong and effective starting point.
Stage 3: Reinforcement Learning Policy Optimization
In the final stage, the language model's policy is fine-tuned against the frozen reward model. The policy generates responses to prompts, the reward model scores those responses, and a reinforcement learning algorithm updates the policy's parameters to maximize the expected reward. This is where human preferences, now encoded in the reward model, actually reshape model behavior: the policy is optimized to produce outputs that the reward model predicts humans would prefer.
A critical architectural constraint in this stage is preventing policy drift. Because the reward model is only an approximation of human judgment, an unconstrained policy can exploit its weaknesses—producing outputs that score highly without genuinely being good. The Hugging Face authors describe the standard remedy: the optimization objective is combined with a penalty term that constrains the fine-tuned policy to stay close to the original supervised model's distribution, so the model maximizes reward without wandering into degenerate text. Algorithms such as Proximal Policy Optimization (PPO) are commonly used for this loop; this article treats them conceptually, as the update mechanism that balances reward maximization against staying anchored to the SFT policy, rather than diving into their mathematics.
RLHF Architectural Stages and Data Flow
The table below maps the full pipeline: each stage's objective, what the model consumes and produces, and the key components involved. Read it as a chronology—the output of each stage feeds the next.
| Stage | Objective | Input | Output | Key Components |
|---|---|---|---|---|
| Stage 1: Supervised Fine-Tuning (SFT) | Produce an initial, capable language model that follows instructions | Pretrained LM plus demonstration data | SFT policy model | Classical pretraining objectives; supervised training on demonstrations |
| Stage 2: Reward Model (RM) Training | Predict human preferences as a scalar value for each response | Human preference comparisons of candidate responses | Trained RM that scores any (prompt, response) pair | Pre-trained LLM backbone with a scalar regression head (a simple linear layer on the final hidden state); acts as a differentiable approximation of human preferences |
| Stage 3: RL Policy Optimization | Optimize the LLM against the RM to maximize reward while preventing policy drift | SFT policy, prompts, and RM reward scores | Aligned language model policy | RL algorithm (commonly PPO, treated conceptually here); penalty constraining the policy to the SFT model's distribution |
The map shows the essential data flow: human judgment enters only in Stage 2, as comparison labels; from Stage 3 onward, the reward model carries that judgment forward as a scalar signal. The base model is transformed into an aligned model through the creation and application of this human-preference-based reward model.
Impact of RLHF on LLM Behavior and Limitations
The behavioral payoff of this architecture is alignment along dimensions that pretraining does not encode. The DEV Community explainer frames RLHF as closing the gap between linguistic fluency and acting in ways humans consider helpful, harmless, and truthful. A 2025 arXiv paper on unanswerability recognition reinforces the point: training a reward model from human preferences and then optimizing the LLM policy on that reward is crucial for steering models toward desired safety and performance characteristics, including the ability to appropriately abstain from answering, with confidence-score guidance reinforcing appropriate abstentions while strongly penalizing confident hallucinations.
Hallucination effects are more nuanced. RLHF shapes behavior indirectly—the model may learn that verbose, overconfident statements receive lower rewards while cautious, well-structured explanations are preferred, leading to hedging, cited reasoning steps, and clarifying questions. But the same explainer warns that RLHF can accidentally increase hallucinations if the reward model implicitly rewards a confident tone or stylistic patterns associated with correctness even when the content is false, which is why multi-reward training and external fact-checking systems are often integrated.
The decisive dependency is data quality. The quality of an RLHF system is largely determined by the quality of the human preference dataset: strong datasets require clear annotation rubrics covering helpfulness, clarity, factual accuracy, safety, and politeness, plus skilled annotators and structured processes. Without standardized guidelines, preference data becomes inconsistent, and the reward model learns noisy or contradictory behavior—so poorly annotated or biased data will lead to a misaligned LLM. The reward model faithfully amplifies whatever preferences it was trained on, including the flawed ones.
Achieving Aligned LLMs: A Multi-Stage Process
To effectively align LLMs with human preferences, implement a multi-stage RLHF process that includes supervised fine-tuning, robust reward model training on high-quality human preference data, and reinforcement learning-based policy optimization. No single stage substitutes for the others: SFT provides the capable starting policy, the reward model converts comparative human judgment into a scalar, differentiable signal, and the RL loop—with a drift penalty anchoring the policy to the SFT model—does the actual behavioral optimization.
The measurable indicator of success is improved model outputs that are consistently helpful, harmless, and truthful, as measured by human evaluation metrics and reduced instances of hallucination. Teams running this pipeline should watch those human evaluation scores and hallucination rates as their concrete checkpoints, and treat any degradation as a signal to revisit annotation rubrics and preference data quality before adjusting the optimization itself.
Sources
- Illustrating Reinforcement Learning from Human Feedback (RLHF) — Huggingface
- 🔥 LLM Interview Series(6): RLHF (Reinforcement Learning from Human Feedback) Demystified — DEV Community
- Reward Model Architectures for LLMs — APXML
- What Is Reinforcement Learning From Human Feedback (RLHF)? — IBM
- Harnessing RLHF for Robust Unanswerability Recognition and Trustworthy Response Generation in LLMs — ARXIV
